设备简介 Introduction
封口系统:
发热源：采用不锈钢发热管，使用寿命长
封刀：采用抗粘耐高温的合金封刀，刀外部镀特氟龙不粘膜
封刀温度控制：采用欧姆龙数显温控仪，温度0-400`C可调
封刀尺寸：宽度及高度手动转轮可调 横封刀长度为L600 mm （***封切尺寸：L不限*宽加高≤520mm 高≤250mm）
封切系统：亚德客气缸控制横封，封口牢固平稳，封口时噪音小
回收系统:
电机：中大电机，保证准确匀速回收废料
感应开关：采用欧姆龙准确控制回收废料时间
输送系统:
皮带：PU网纹、厚度1.3MM
电机：中大电机，保证输送平稳
检测：采用欧姆龙光电传感器，准确灵敏的检测产品输送和停止
送膜系统:
电机：台邦，保证送膜平稳
感应开关：采用“欧姆龙”准确控制送膜长度
Sealing system:
Heating source: stainless steel heating tube, long service life.
Knife sealing: the knife is sealed with anti-sticking and high-temperature resistant alloy, and the outside of the knife is coated with Teflon non-stick film.
Temperature control of sealing knife: Omron digital display temperature controller is adopted, and the temperature can be adjusted from 0 to 400' C.
Size of sealing knife: width and height. Manual wheel can be adjusted. The length of transverse sealing knife is L600 mm.(Maximum sealing and cutting size: l unlimited * width and height ≤520mm and height ≤250mm)
Sealing and cutting system: Yadeke cylinder controls transverse sealing, which ensures firm and stable sealing and low noise when sealing.
Conveying system:
Belt: PU mesh, thickness 1.3MM
Motor: Zhongda motor ensures smooth transportation.
Detection: Omron photoelectric sensor is used to accurately and sensitively detect the delivery and stop of products.
Recovery system:
Motor: Zhongda motor ensures accurate and uniform recycling of waste materials.
Induction switch: Omron is used to accurately control the time of recycling waste.
Film feeding system:
Motor: Taibang ensures smooth film feeding.
Induction switch: "Omron" is used to accurately control the film feeding length.
客服小妹
